The RRB Technician Grade 1 Admit Card 2026 will be released by the Railway Recruitment Board for candidates appearing in the Technician Grade 1 Signal Computer Based Test under CEN No. 02/2026. The e-Call Letter will contain the candidate’s examination date, shift, reporting time, examination centre and important instructions.
Candidates should download the admit card from the official website of their respective RRB zone. The exact examination details should be checked from the candidate’s individual City Intimation Slip and E-Call Letter, as these documents provide the information applicable to each candidate.
RRB Technician Grade 1 Admit Card 2026 Overview
| Particular | Details |
|---|---|
| Recruitment Board | Railway Recruitment Board (RRB) |
| Recruitment | RRB Technician Recruitment 2026 |
| CEN | 02/2026 |
| Post | Technician Grade 1 Signal |
| Exam Mode | Computer Based Test (CBT) |
| Exam Date | Check E-Call Letter |
| City Intimation Slip | To be released as per schedule |
| Admit Card | Released before the CBT |
| Selection Process | CBT, Document Verification & Medical Examination |
| Admit Card Mode | Online |
| Official Portal | Respective RRB Regional Website |
RRB Technician Grade 1 Admit Card 2026 Download Link
The RRB Technician Grade 1 Admit Card 2026 download link will be available through the official RRB regional websites. Candidates should select the RRB zone relevant to their application and open the CEN 02/2026 Technician section.
After the link becomes active, candidates will need to enter their registration/login details to access the e-Call Letter.
Candidates should avoid downloading the admit card from unofficial websites. The official RRB regional portals should be used for the latest recruitment notices, City Intimation Slip and E-Call Letter.
RRB Technician Grade 1 City Intimation Slip 2026
The RRB Technician Grade 1 City Intimation Slip 2026 is issued before the admit card to provide candidates with advance information about their examination city and scheduled examination date.
This information helps candidates plan their travel arrangements before the detailed centre information becomes available.
The City Intimation Slip does not replace the admit card. Candidates must download and carry the official E-Call Letter to the examination centre.
The final examination centre address, reporting time, shift and other instructions should be checked from the admit card.
How to Download RRB Technician Grade 1 Admit Card 2026
Candidates can download their e-Call Letter by following these steps:
- Visit the official website of the concerned Railway Recruitment Board.
- Open the CEN 02/2026 Technician section.
- Look for the Technician Grade 1 Admit Card/E-Call Letter link.
- Click on the admit card download link.
- Enter your Registration Number and Date of Birth/Password.
- Enter the required captcha or verification details.
- Click on the Login/Submit button.
- The RRB Technician Grade 1 Admit Card will appear on the screen.
- Download and save the admit card.
- Take a clear printout for the examination.
Candidates should keep the registration details safely until the complete recruitment process is over.
Details Mentioned on RRB Technician Grade 1 Admit Card
After downloading the admit card, candidates should carefully check all the information printed on it.
The E-Call Letter may contain:
- Candidate’s Name
- Roll Number
- Registration Number
- Photograph
- Signature
- CEN Number
- Post Name
- Examination Date
- Examination Shift
- Reporting Time
- Gate Closing Time
- Examination Centre Name
- Complete Centre Address
- Exam-related instructions
- Identity verification instructions
Candidates should immediately contact the concerned RRB if there is a serious discrepancy in important personal or examination details.
RRB Technician Grade 1 Exam Pattern 2026
The Technician Grade 1 selection process includes a Computer Based Test. The CBT is conducted online and consists of objective-type questions.
Candidates should prepare according to the syllabus prescribed for Technician Grade 1 Signal under the applicable recruitment notification.
The major areas of preparation include:
| Subject | Main Area |
|---|---|
| Mathematics | Basic and competitive-level mathematical concepts |
| General Intelligence & Reasoning | Logical and analytical reasoning |
| General Awareness | Current affairs and general knowledge |
| Basics of Computers & Applications | Computer fundamentals and applications |
| Basic Science & Engineering | Relevant science and engineering concepts |
Candidates should refer to the official CEN for the detailed syllabus, marking scheme and other examination conditions applicable to their recruitment.
RRB Technician Grade 1 Selection Process
Candidates are selected through the stages prescribed by RRB for the Technician Grade 1 post.
The recruitment process broadly includes:
Computer Based Test → Document Verification → Medical Examination
Candidates who qualify for the CBT and meet the applicable shortlisting conditions may be called for Document Verification. Candidates shortlisted for appointment must also satisfy the prescribed medical standards.
Documents Required for RRB Technician Grade 1 Exam
Candidates should carefully check the documents listed in their E-Call Letter before leaving for the examination centre.
Important documents may include:
- Printed copy of the RRB Technician Grade 1 E-Call Letter
- Original valid photo identity proof
- Recent photograph, if specifically required
- Other documents mentioned in the examination instructions
Candidates should carry the original identity document required by RRB. A photocopy or an invalid document should not be relied upon for entry.
Aadhaar Authentication and Biometric Verification
Candidates should follow all identity verification instructions issued by RRB.
Where Aadhaar-based authentication is applicable, candidates should ensure that their Aadhaar details are correctly available and follow the authentication instructions provided by the Railway Recruitment Board.
Biometric or other identity verification may be conducted at the examination centre. Candidates should therefore reach the venue sufficiently early.
Important Instructions for RRB Technician Grade 1 Exam
Candidates should carefully read every instruction printed on the E-Call Letter before appearing for the examination.
Reach the examination centre before the reporting time mentioned on the admit card. Candidates arriving late may face difficulties during security checking, biometric authentication and entry procedures.
Candidates should not carry prohibited items such as mobile phones, smartwatches, Bluetooth devices, calculators or other electronic gadgets unless specifically permitted.
The candidate should also check the examination centre location in advance to avoid delays on the examination day.
What to Do After Downloading the Admit Card?
After downloading the RRB Technician Grade 1 Admit Card, candidates should first verify their personal details.
Next, check the exam date, shift, reporting time, gate closing time and complete examination centre address. Candidates should also read the instructions related to identity proof and prohibited items.
It is advisable to save a digital copy of the admit card and keep a printed copy ready before the examination.
RRB Technician Grade 1 Admit Card 2026 Important Links
| Particular | Link |
|---|---|
| RRB Technician Grade 1 Admit Card 2026 | soon |
| RRB Technician City Intimation Slip 2026 | Check City & Exam Date |
| RRB Technician CEN 02/2026 | View Official Notice |
| RRB Regional Websites | Visit Regional RRB Portal |
| RRB Official Website | Visit Official Website |
Conclusion
The RRB Technician Grade 1 Admit Card 2026 is an important document required for appearing in the Computer Based Test. Candidates should download it from their respective official RRB regional website once the link becomes active.
The City Intimation Slip should be used only to check preliminary examination city and date information. The final examination details, including the centre address, shift and reporting time, should be confirmed from the RRB Technician Grade 1 E-Call Letter.
Candidates should regularly check the official RRB website and avoid relying on unverified examination dates or admit card links shared on unofficial platforms.
FAQs
1. When will the RRB Technician Grade 1 Admit Card 2026 be released?
The admit card will be released before the candidate’s scheduled CBT as per the RRB examination schedule.
2. Where can I download the RRB Technician Grade 1 Admit Card?
Candidates can download the admit card from the official website of their respective RRB zone.
3. What is the CEN number for RRB Technician Grade 1?
The recruitment is being conducted under CEN No. 02/2026.
4. What is the RRB Technician Grade 1 City Intimation Slip?
It is an advance information slip that provides details such as the candidate’s examination city and scheduled examination date.
5. Is the City Intimation Slip the same as the admit card?
No. The City Intimation Slip and E-Call Letter are different. Candidates must carry the prescribed E-Call Letter to the examination centre.
6. What details are required to download the admit card?
Candidates generally need their Registration Number and Date of Birth/Password to log in.
7. What information is available on the RRB Technician Grade 1 Admit Card?
The admit card contains the exam date, shift, reporting time, centre address, roll number and important examination instructions.
8. Which documents should I carry to the examination centre?
Candidates should carry the printed E-Call Letter and original valid photo ID, along with any additional documents specifically mentioned in the admit card.
9. Can I use the City Intimation Slip to enter the exam centre?
No. The City Intimation Slip is not a substitute for the RRB Technician Grade 1 E-Call Letter.
10. Where can I check the final examination date and centre?
Candidates should check their individual E-Call Letter, as it contains the final examination date, shift, reporting time and examination centre details.
